Installation and Maintenance Videos
Installing and replacing Metron meters is straight-forward. Here are some videos to help you along.
On this page:
Meter Installation videos
- Water meter installation – 1/2″ PEX pipe
- Water meter installation – 1/2″ copper pipe
- Water meter installation – 3/4″ PEX pipe
- Water meter installation – 3/4″ copper pipe
- Water meter installation – 3/4″ PVC pipe
- How to replace your submeter with a Metron meter
- Meter anatomy: Spectrum S30 submeter
- Metron meters antenna overview and installation
- Pit-mount antenna setup
- Spectrum Wave insulation jacket installation
- Self-installing your water meters – next steps
- How to initialize a Metron gateway
- Installing a Metron register onto a third-party water meter
- Installing a Metron register onto an Elster water meter
- 5 gallon bucket test
- Prism R and SCADAmetrics: monitoring a 3-wire master meter
Meter Maintenance videos
- The anatomy of a Metron Spectrum Jet meter
- The anatomy of the Metron Spectrum Wave ultrasonic meter
- How to prevent water meters from freezing
- Installing heat tape and insulation on a residential water meter
- Installing an insulation jacket on a Metron residential meter
- How to clear a blocked water meter
- How to “chirp” a Metron water meter
- Removing the register from a water meter
- Register replacement – old style plastic housing
- Water meter body replacement
- How to replace the register on a Metron water meter
- How to replace the register on a large commercial Metron water meter
Meter Installation Videos
Installing an insulation jacket on a Metron residential meter
It’s important to prevent water meters from freezing, especially meters situated under mobile homes. Heat tape is essential, and so is insulation. Installing the soft insulation jacket around a Metron meter is simple, as long as you don’t damage any antenna cables. Watch the video to find out how it’s done.